When considering Bella Citta installation in your home, you have two options: you can either install the flooring yourself, or you can choose to have it professionally installed. If you are going to do the project yourself, you should know that Bella Citta flooring involves engineered wood, and you will need to have some specific knowledge about that type of flooring before you begin.
If you make an error in the installation or forget to place a waterproof covering in an area where moisture is prevalent, and later the flooring has issues, such as warping or bowing. Your warranty will not be valid. Engineered wood flooring requires the perfect installation technique with no errors. Therefore, unless you are an installer yourself, the best advice is to let the professionals do it for you.
When you purchase Bella Citta flooring, the representatives there will recommend a professional installer for you. If you are wondering about Bella Citta installers near me when you make your purchase at East Coast Flooring & Interiors, we have our professional installers who can do the job for you. The flooring installation experts at East Coast Flooring & Interiors are licensed, capable, and up to date on all industry standards and installation techniques.
What is Involved?
Pre-Installation
- Mark the areas where you want the flooring installed. Clean up as much debris as you can; this will save time and money. For example, if there is any old carpet, remove it yourself if possible. Remove all nails, old adhesive, paint, and wax. The floor should be clean and dry.
- Remove all furniture and other items from the room where the flooring is to be installed.
- Take measurements of the floor so that you know how much flooring material will be required. This way, you will not have any shortages or wastage. In general, when purchasing, order about 5 percent more than you think you will need to avoid any shortages. During the cutting of the planks, you may lose some length or width.
- When the flooring material arrives, the owner’s responsibility is to check all the planks to ensure that the color, grade, design, and finish are exactly what they wanted. If the flooring is not what you want or if you have any questions, do not start with the installation. Call the supplier first and sort out the issues. If the flooring is installed while away from home and you later realize that it was the wrong design or color, nothing can be done. If you later note that there are some visible dents or cracks in the flooring, the supplier is not responsible. The onus is on the owner to check all the materials before installation.
- If you plan to install Bella Citta hardwood flooring, you need to order the supplies at least three days before the actual date of installation. This will allow the materials time to adjust to the home temperature and humidity (acclimate, if you will). The flooring material should be kept in the room where the installation will take place and away from any heating, air vents, or direct sunlight. The materials should not be placed directly on concrete. The cartons should only be opened on the day of installation.
- The homeowner should select the right installer with experience. The installer should know where the flooring should and should not be installed. In general, Bella Citta flooring is not recommended for installation in moisture-prone areas like the kitchen and bathroom. If Bella Citta flooring is installed in these places and later develops warping or bowing, this is not covered under warranty. The best advice is to use an installer recommended by the vendors of Bella Citta flooring.
- The owner should be aware that there may be some minor differences in color and grain between the planks. This is due to natural variation in the wood, and defects up to 5 percent are considered acceptable.
- If the home is new, all plumbing and other work must be completed before installing the flooring.
Installation
- The installation may take 1-2 days, depending on the size of the room and the complexity of the flooring.
- The installation of Bella Citta flooring requires the use of a strong adhesive.
Post-Installation
- After the installation, you should wipe the flooring and ensure that it is dry. Then you should apply a thin layer of Bella Citta maintenance oil with a buffing machine.
- After applying the oil, let the coating dry for a minimum of 12-24 hours before walking on it. Do not move any furniture onto the flooring for at least 48 hours to allow time for proper curing of the oil.
- Only dry clean the newly oiled floor to permit the Bella Citta’s maintenance oil to cure completely. Do not use any type of sticky tape or a heavy brush to remove debris as it may damage the finish.
- If you are unsure about the humidity in the home, purchase a portable meter that can monitor the moisture content.
Noises
After installation, you may hear occasional sounds like crackling or popping on the floor when walking. These minor noises are common and may occur when the environment changes. However, these noises can be minimized by proper installation and using nails as well as an adhesive.
What is the Cost of Installation?
The cost of a Bella Citta installation depends on the size and complexity of the floor. In general, for a 1,500-square-foot floor, the installation cost may vary from $2,000-$3,000. Always seek an installer who charges a flat rate and not by the hour. If you are asking yourself if there are Bella Citta installers near me, look no further than East Coast Flooring & Interiors.
When considering which flooring to purchase, research your options carefully. East Coast Flooring & Interiors can be quite helpful as they are experts in flooring. Call them today at 1-954-626-8053.